【SG-BX05】🔥🎁SMA905 50X Magnification Optical Fiber Laser Beam Expander (DIY Your Own Laser)

Attention: This 50x beam expander is only suitable for fiber lasers, not for other lasers.

You can get this beam expander to DIY your own fiber laser.

Attention: the interface is SMA905

Disclaimer: All the laser pointers are handmade customized products. Handmade DIY products are non returnable and non exchangeable, please do not order if you mind. We will do 100% quality inspection before delivery to ensure the equipment is in good working condition.

Specifications:

Model Number: SG-BX05

Laser wavelength：900-1100nm

Length after adjusting: 25cm

Interface: SMA905

Adaptive fiber laser：Ranging from 260 watts to 2000 watts.

Function: the light spot can be compressed to the millimeter level. Very suitable for DIY your own laser.

By installing this 50x beam expander, it is possible to ignite the cardboard box and wood within 50 meters.

This laser is not suitable for minors because it emits radiation that can be dangerous for the eyes. Do not look directly at the light or the laser aperture. Looking directly into the beam of light from close range can cause irreversible damage to the eyes.

Disclaimer: Never point your laser at aircrafts or cameras, as this can get you into legal trouble.

1. Don’t allow the laser beam to enter the eye, any contact will cause permanent damage
2. Don’t point laser pen to the crowd, especially in the face
3. Remove the battery when not in use, and putting it some place where children can not touch
4. Battery charging 6-10 hours, please do not charge for a long time, in order to avoid damage to the battery
5. If you found laser pointer flashlight brightness severely reduced, please note to recharge the battery or replace the battery.

We Test every single laser that we are going to ship to you, and make sure you receive no faulty lasers, we dont sell the cheapest lasers, but we sell the high quality lasers with the most competitive price!

AVAILABLE ONLINE ONLY. WE SHIP WORLDWIDE!